DOD-STD-35-71A(MI)
14 January 1983
CHAR
CODE
STANDARD
PARAGRAPH
2604 CONDITIONING TEMPERATURE TOLERANCE SHALL BE PLUS OR
MINUS 2604 DEGREE(S) CELSIUS.
2606
CONDITIONING TEMPERATURE SHALL BE 2606 DEGREES FAHRENHEIT.
2608 CONDITIONING TEMPERATURE TOLERANCE SHALL BE PLUS OR MINUS
2608 DEGREE(S) FAHRENHEIT.
2610 CONDITIONING RELATIVE HUMIDITY S14ALL BE 2610 PERCENT.
2612 CONDITIONING RELATIVE HUMIDITY TOLERANCE SHALL BE PLUS
OR MINUS 2612 PERCENT.
2240
INTERMEDIATE CURRENT SWITCHING,
THE REQUIREMENT(S)
SHALL BE IN ACCORDANCE WITH THE BASE DOCUMENT, EXCEPT
2240.
2242
INTERMEDIATE CURRENT SWITCHING.
THE REQUIREMENT(S)
SHALL BE AS FOLLOWS.
2244 THERE SHALL BE 2244 FAILURE(S) ALLOWED.
A FAILURE IS
DEFINED AS A CYCLE OF OPERATION DURING WHICH ANY SWITCH
CIRCUIT UNDER TEST FAILS TO OPEN IN PROPER SEQUENCE AS
DETECTED BY MONITORING DEVICE.
2246 THE ALLOWABLE TEMPERATURE TOLERANCE DURING AND AFTER
TEST SHALL BE THE INITIAL TEMPERATURE TOLERANCE AND AN
ADDITIONAL PLUS OR MINUS 2246 DEGREE(S) CELSIUS.
83
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business