For Parts Inquiries call (727) 344-9615
A Service Disabled Veteran Owned Small Business
© Copyright 2015 Integrated Publishing, Inc.

DOD-STD-35-71 Automated Engineering Document Preparation System Switches \(Thermal\)This military standard provides the necessary information to prepare a Specification Requirement Sheet \(SRS\) which will be used to generate a MSE by automated data processing.

Pages 1 - - 86 - 87 - 88 - 89 - 90 - 91 - 92 - 93 - 94 - 95 - 96 - 97 - 98|||99 - 100 - 101 - 102 - 103 - 104|||


DOD-STD-35-71A(MI)
14 January 1983
CHAR
CODE
STANDARD PARAGRAPH
THERE SHALL BE NO EVIDENCE OF
1396 MOISTURE RESISTANCE.
CORROSION OR PHYSICAL DAMAGE.
1394 THERE SHALL BE NO EVIDENCE OF FLASHOVER, MECHANICAL
DAMAGE, ARCING OR INSULATION BREAKDOWN, WHEN DIELECTRIC
WITHSTANDING VOLTAGE IS APPLIED.
1432
INSULATION RESISTANCE SHALL BE NOT LESS THAN 1432
MEGOHM(S) AT HIGH HUMIDITY.
1406
INSULATION RESISTANCE SHALL BE NOT LESS THAN 1406
MEGOHM(S) AFTER DRYING.
2620 UNITS SHALL CONFORM TO CALIBRATION REQUIREMENTS AFTER
TEST.
2622
THE CHANGE IN SWITCHING POINT SHALL BE NOT GREATER
THAN 2622 DEGREE(S) CELSIUS.
THE CHANGE IN SWITCHING POINT SHALL BE NOT GREATER
2624
THAN 2624 DEGREE(S) FAHRENHEIT.
TESTING SHALL BE PERFORMED IN
1391
MOISTURE RESISTANCE.
ACCORDANCE WITH THE BASE DOCUMENT, EXCEPT 1391.
TESTING SHALL BE PERFORMED IN
1397 MOISTURE RESISTANCE.
ACCORDANCE WITH METHOD 106 OF MIL­STD­202.
89



For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business

© Copyright 2015 Integrated Publishing, Inc. Site Design & Marketing by Strategico.