For Parts Inquiries call (727) 344-9615
A Service Disabled Veteran Owned Small Business
© Copyright 2015 Integrated Publishing, Inc.

DOD-STD-35-71 Automated Engineering Document Preparation System Switches \(Thermal\)This military standard provides the necessary information to prepare a Specification Requirement Sheet \(SRS\) which will be used to generate a MSE by automated data processing.

Pages 1 - - 82 - 83 - 84 - 85 - 86 - 87 - 88 - 89 - 90 - 91 - 92 - 93 - 94 - 95 - 96 - 97 - 98|||99 - 100|||


DOD-STD-35-71A(MI)
14 January 1983
CHAR
CODE
STANDARD
PARAGRAPH
2248 THE ALLOWABLE TEMPERATURE TOLERANCE DURING AND AFTER
TEST SHALL BE THE INITIAL TEMPERATURE TOLERANCE AND AN
ADDITIONAL PLUS OR MINUS 2248 DEGREE(S) FAHRENHEIT.
2250
INTERMEDIATE CURRENT SWITCHING.
TESTING SHALL BE
PERFORMED IN ACCORDANCE WITH THE BASE DOCUMENT, EXCEPT
2250.
2252
INTERMEDIATE CURRENT SWITCHING.
TESTING SHALL BE
PERFORMED IN ACCORDANCE WITH METHOD 312 OF MIL-STD­202.
2254 THE RESISTIVE LOAD VOLTAGE APPLIED TO THE CONTACTS
SHALL BE 2254 VOLT(S) DC.
2256 THE VOLTAGE TOLERANCE SHALL BE PLUS OR MINUS 2256
VOLT(S) DC.
2258 THERE SHALL BE 2258 CYCLES OF OPERATION.
2260 THE CYCLING RATE SHALL BE NOT GREATER THAN 2260 CYCLES
PER MINUTE.
2262 MONITORING OF CONTACTS FOR STICKING SHALL NOT BE
APPLICABLE.
2270 LOW­LEVEL SWITCHING.
THE REQUIREMENT(S) SHALL BE IN
ACCORDANCE WITH THE BASE DOCUMENT, EXCEPT 2270.
2272 LOW­LEVEL
SWITCHING.
THE REQUIREMENT(S) SHALL BE AS
FOLLOWS.
85



For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business

© Copyright 2015 Integrated Publishing, Inc. Site Design & Marketing by Strategico.