DOD-STD-35-36 Automated Engineering Document Preparation System Seals, Gaskets, And PackingThis military standard provides the necessary information to prepare a Specification Requirement Sheet \(SRS\) which will be used to generate an MSE by automated data processing.

Pages 1 - - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78|||

DOD-STD-35-36B(MI)

20 February 1979

CHAR

CODE STANDARD PARAGRAPH

THE REQUIREMENT(S) SHALL BE IN ACCORDANCE

1726

AGINGt LIGHT.

WITH THE BASE DOCUMENT, EXCEPT 1726.

THE REQUIREMENT(S) AFTER TESTING SHALL BE

1725 AGING, LIGHT*

AS FOLLOWS:

1728 THE MATERIAL SHALL SHOW NO CRACKING OR CRAZING AS A

RESULT OF THE TEST.

1730 THE MINIMUM TENSILE STRENGTH SHALL BE 1730 PERCENT OF

INITIAL VALUE.

732 THE MINIMUM ULTIMATE ELONGATION SHALL BE 1732 PERCENT OF

INITIAL VALUE.

1714 AGING, LIGHT.

TESTING SHALL BE PERFORMED IN ACCORDANCE

WITH THE BASE DOCUMENT, EXCEPT 1714.

17L6. AGING, LIGHT-

TESTING SHALL BE PERFORMED IN ACCORDANCE

WITH ASTMD750.

1718 THE LIGHT EXPOSURE TIME SHALL BE 1718 HOUR (S).

1720 THE EXPOSURE TEMPERATURE SHALL BE 1720 DEGREES CELSIUS.

1722 THE EXPOSURE TEMPERATURE TOLERANCE SHALL BE 1722 DEGREES

CELSIUS.